Warning/Note: This is not an update to the existing firmware. This is for installing Debian. If you don’t know anything about Linux, this is not for you. This firmware DOES NOT contain web interface.

I haven’t looked again on Debian installer for Agestar, but I have built a new firmware for Debian on Agestar using the latest kernel patch (faster network). If you have installed Debian using the instruction in here, you can download zImage-20092008 to Agestar, and then do:

dd if=zImage-20092008 of=/dev/mtdblock1

If you haven’t installed Debian, then when following the instruction, but instead of using star.bin use star-20092008.bin. To make it clear, use zImage-20092008 to update existing installation, and star-20092008.bin for new installation (starting from the original Agestar firmware). If you made a mistake, then you need a serial port to unbrick your Agestar.

If you are interested to make your own firmware, this is what you should do:

1. Download armboot.bin and put it to a directory
2. Download mergefile.c to the same directory as armboot.bin
3. Compile mergefile.c (just do cc mergefile.c -o mergefile)
4. Compile your kernel according to the instruction athttp://tinyhack.com/2008/09/08/how-to-compile-kernel-for-agestar/ to create zImage, copy/move it to the same directory as armboot.bin
5. Type ./mergefile to merge armboot.bin and zImage to star.bin.

You can use star.bin to flash (replace) original firmware. If you already installed Debian, and you want to update your kernel, you only need to build zImage and dodd if=newzImage of=/dev/mtdblock1.